Le Forum de l'Alliance Francophone

Nouvelles:

Auteur Sujet: [PrimGrid] PPS Sieve - GFN - GFN WR sur ATI R9  (Lu 4514 fois)

0 Membres et 1 Invité sur ce sujet

Philippe06121966

  • Invité
Hello !  :hello:

POUR INFORMATION SEULEMENT ET POUR ESSAYER D'AIDER LES HEUREUX POSSESSEURS D'UNE R9 :

Trouvé dans les forums PrimeGrid un fichier app_info qui permet PERMETTRAIT d'obliger BM à télécharger des UT PrimeGrid pour les GPU ATI R9

Bon Crunch :D

EDIT : Il FAUT adapter cette ligne (elle apparaît 3 x 2 xdans le fichier) à votre version de BOINC :

<api_version>7.0.64</api_version>

IL FAUDRA PROBABLEMENT ADAPTER CET EXEMPLE A CHAQUE SITUATION (OS / Version BOINC / Cohabitation éventuelle nVidia-ATI, NE GARDER QUE LA PARTIE VOUS INTÉRESSANT,  ...)

IL NE S'AGIT QUE D'UNE INFORMATION DE BASE, PAS D'UNE SOLUTION MIRACLE, DÉSOLÉ


Source du fichier :

Running on an ATI/AMD GPU:


    Your GPU MUST support double precision floating point. Most modern ATI/AMD GPUs will work. See this thread for a list of compatible GPUs. Also please read this thread for a discussion of using ATI/AMD GPUs.
    At the present time, the server won't send tasks to the new 290x (Hawaii) GPU. Using app_info is required to get tasks for this GPU. I do not expect this problem to be resolved before the challenge. (This applies to PPS-sieve as well as GFN-WR and GFN-Short tasks.)
    Running more than one copy of GFN on your GPU is strongly discouraged. It's likely there will be little improvement in throughput but you will make the tasks run about twice a long, which means you're likely to finish fewer tasks during the challenge.

Source : http://www.primegrid.com/forum_thread.php?id=5428&nowrap=true#71715

« Modifié: 25 January 2014 à 10:12 par Phil1966 »



Hors ligne JeromeC

  • CàA
  • Boinc'eur devant l'éternel
  • *****
  • Messages: 31108
  •   
Réponse #1 le: 24 January 2014 à 23:21
T'es sûr que t'es au bon endroit ? ;)

A quoi bon prendre la vie au sérieux, puisque de toute façon nous n’en sortirons pas vivants ? (Alphonse Allais)



Philippe06121966

  • Invité
Réponse #2 le: 25 January 2014 à 09:26
 :ayalou:



Hors ligne Spica

  • Méchant modo
  • Boinc'eur devant l'éternel
  • ******
  • Messages: 5146
  •   
Réponse #3 le: 25 January 2014 à 09:41


EDIT : Il FAUT adapter cette ligne (elle apparaît 3 x dans le fichier) à votre version de BOINC :

<api_version>7.0.64</api_version>

Désolé, dans ton fichier, elle n'apparait QUE 2 fois

22717 SETI@home classic workunits; Redécouverte pulsar J1916+12 (le 07Nov2009) Einstein@Home.


Hors ligne sebcbien_bzh

  • Boinc'eur Confirmé
  • ***
  • Messages: 445
  •   
Réponse #4 le: 27 January 2014 à 18:46
j'ai le meme soucis avec une HD7790.
 j'ai du mettre les .exe à la mains, puis modifier le app info, sachant que pour chaque projet il faudrait faire de meme à part quelques exceptions.

Il semblerait que ce problème soit dû à l'arret de l'installation de CAL dans certains GPU récent par ATI, ce CAL sert peut être à déterminer quel type de GPU ATI est présent... mais n'est pas nécessaire aux calculs.

lien pour trouver les exe primgrid :
http://www.primegrid.com/download/?C=M;O=D
dans mon cas Windows + ati j'ai pris les x86 ATI:

http://www.primegrid.com/download/primegrid_genefer_3_1_2_7_2.10_windows_intelx86__atiGFN.exe
http://www.primegrid.com/download/primegrid_genefer_3_1_2_7_2.10_windows_intelx86__atiGFNWR.exe
http://www.primegrid.com/download/primegrid_tpsieve_1.39_windows_intelx86__atiPPSsieve.exe


« Modifié: 28 January 2014 à 09:27 par sebcbien_bzh »



Hors ligne TRINITAS

  • Boinc'eur Confirmé
  • ***
  • Messages: 296
  •   
    • E-mail
Réponse #5 le: 27 May 2014 à 13:32
CAL est initialement prévu pour fonctionner sur des GPU employant des architectures vectorielles: les VLIW

Ça va du HD2000 aux HD6900.

Les HD7000 et Rx-200 emploient du scalaire, le CAL n'est donc plus adapté (et même dépassé). Les puces GCN emploient donc que l'OpenCL 1.2

PC1: RyZen 7 5800X3D - 32GB DDR4 - 2xRadeon RX 7900 GRE - Windows 10 Pro
PC2: Xeon E5-2678 v3 (x2) - 64GB DDR4 - GeForce RTX 2080 SUPER FE + Radeon VII - Windows 10 Pro
PC3: RyZen 3 3200G - 16GB DDR4 - ARC A770 16GB - Windows 10 Pro